Appendix B -Settings and Signals
MENU TEXT COL ROW DEFAULT SETTING AVAILABLE OPTIONS
DESCRIPTION
This setting enables CB2 to auto-reclose as leader when the system satisfies all the System Check Synchronism Stage 1 criteria as defined
under CB2 CS1 Status settings in the SYSTEM CHECKS column.
CB2L SC CS2 49 B2 Disabled
Enabled
This setting enables CB2 to auto-reclose as leader when the system satisfies all the System Check Synchronism Stage 2 criteria as defined
under CB2 CS2 Status settings in the SYSTEM CHECKS column.
CB2L SC DLLB 49 B3 Disabled
Enabled
This setting enables CB2 to auto-reclose as leader when the dead line & live bus 2 conditions are satisfied as set in the SYSTEM CHECKS
column.
CB2L SC LLDB 49 B4 Disabled
Enabled
This setting enables CB2 to auto-reclose as leader when the live line & dead bus 2 conditions are satisfied as set in the SYSTEM CHECKS
column.
CB2L SC DLDB 49 B5 Disabled
Enabled
This setting enables CB2 to auto-reclose as leader when the dead line & dead bus 2 conditions are satisfied as set in the SYSTEM CHECKS
column.
CB1F SC all 49 B6 Disabled
Enabled
This setting determines whether a system check (e.g. live bus / dead line etc) is required for any auto-reclose of CB1 as follower. If Enabled,
system check is required for some or all reclosures. If Disabled, system check is not required for any reclosures.
CB1F SC Shot 1 49 B7 Disabled
Enabled
This setting determines whether a system check (e.g. live bus / dead line etc) is required for the first shot reclosure of CB1 as follower. If
Enabled, system check is required for the first shot reclosure. If Disabled, system check is not required for the first shot reclosure.
CB1F SC CS1 49 B8 Disabled
Enabled
This setting enables CB1 to auto-reclose as follower when the system satisfies all the System Check Synchronism Stage 1 conditions as listed
under setting CB1 CS1 Status in the SYSTEM CHECKS column.
CB1F SC CS2 49 B9 Disabled
Enabled
This setting enables CB1 to auto-reclose as follower when system satisfies all the System Check Synchronism Stage 2 conditions as listed
under setting CB1 CS2 Status in the SYSTEM CHECKS settings.
CB1F SC DLLB 49 BA Disabled
Enabled
This setting enables CB1 to auto-reclose as follower when the dead line & live bus1 conditions are satisfied in the SYSTEM CHECKS column.
CB1F SC LLDB 49 BB Disabled
Enabled
This setting enables CB1 to auto-reclose as follower when the live line & dead bus1 conditions are satisfied in the SYSTEM CHECKS column.
CB1F SC DLDB 49 BC Disabled
Enabled
This setting enables CB1 to auto-reclose as follower when the “dead line” & “dead bus1” conditions are satisfied in the SYSTEM CHECKS
settings.
CB2F SC all 49 BD Disabled
Enabled
This setting determines whether a system check (e.g. live bus / dead line etc) is required for any auto-reclose of CB2 as follower. If Enabled,
To Next Page
Loading...
