GE Multilin MIB - Setting Change Confirmation

A-10 MIB High Impedance Bus Differntial Relay GEK-106426B
A.4 WRITING SETTINGS APPENDIX A
A
A.4.2 SETTING CHANGE CONFIRMATION
Request:
Reply:
FIELD LENGTH
Relay address 1 byte
Function 1 byte (10H)
Beginning address 1 word (0000H) (High Byte – low byte)
Number of registers 1 word (0003H) (High Byte – low byte)
Number of bytes 1 byte (06H)
Value of the registers Register1=>Command code (0200H) (Low byte-High byte)
Register2=>Relay password (Low byte-High byte)
Register3=> Constant value 0000H
CRC 1 word
FIELD LENGTH
Relay address 1 byte
Function 1 byte (10H)
Beginning address 1 word (0000H) (High Byte – low byte)
Number of registers 1 word (0003H) (High Byte – low byte)
CRC 1 word