GE Multilin MIB - Errors

GEK-106426B MIB High Impedance Bus Differntial Relay A-21
APPENDIX A A.7 ERRORS
A
A.7ERRORS
When any of the previous commands produce an error in the slave the following frame is received:
We can receive the following values in the error code field::
ADDRESS FUNCTION + 80 H COD. ERROR CRC
01H 90H 07H 0DC2H
01 ILLEGAL FUNCTION
02 ILLEGAL DATA ADDRESS
03 ILLEGAL DATA VALUE
04 SLAVE DEVICE FAILURE
05 ACK.
06 SLAVE BUSY
07 NEGATIVE ACKNOWLEDGE
08 MEMORY PARITY ERROR