4–72 MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
SYSTEM ADMINISTRATION CHAPTER 4: SYSTEM ADMINISTRATION
Speed: The baud rate of the port. This parameter may take one of the
following values:
• 1200
• 2400
• 4800
• 9600
• 19200
• 28800
• 33600
• 38400
• 57600
• 115200
Default value = 9600
Data Bits: The total number of bits in a character. This parameter may
take one of the following values:
•7
•8
Default value = 8
Stop Bits: The duration of the MARK condition on the line after character
transmission is complete. This parameter may take one of the
following values:
•1
•1.5
•2
Default value = 1
Parity: This parameter may take one of the following values:
•None
•Even
•Odd
Default value = None
Table 4–44: Ports: Profiles
Field Name Field Value
To Next Page
Loading...
