CHAPTER 2: GETTING STARTED GETTING STARTED
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL 2–29
Software Upgrade Install a newer version of software.
Configuration
Configuration: Files View and manage available configuration files.
Configuration: Defaults Restore the system’s default configuration.
System Reboot Shut down and restart the system.
Events Tasks
Logs
Logs: Global Settings Enable logging of events and control logfile number and size.
Logs: Files Displays hyperlinks to available log files.
Syslog
Syslog: Global Settings Enable/disable syslog protocol functionality.
Syslog: Collectors Specify IP addresses of syslog event collectors.
Ethernet Tasks
Ports
Ports: Settings Enable and disable Ethernet ports and set and view configurations
(media type, flow control, FEFI).
Ports: Status Check capabilities and operational status of each Ethernet port.
Ports: Summary Statistics View basic performance statistics for each Ethernet port.
Ports: Extended Statistics View detailed performance statistics for each Ethernet port.
Ports: Mirroring Forward packets from one port on a Multinet4 to another for analysis.
Ports: Rate Limits Specify limits on the throughput of certain types of packets.
Bridge
Bridge: Global Settings View or set the aging interval for learned MAC addresses.
Bridge: Static MACs Add or remove static MAC addresses in the bridge MAC address table.
Bridge: Station Cache View a table of MAC addresses and the ports that access them.
RSTP
RSTP: Bridge Settings Configure RSTP settings for the bridge.
RSTP: Port Settings Associate specific Ethernet ports with RSTP values (mode, priority).
RSTP: Bridge Status View RSTP counters and status for the bridge.
RSTP: Port Status View RSTP counters and status for specific Ethernet ports.
Table 2–2: Menu Tree
Screen Function
To Next Page
Loading...
