GE PACSystems RX7i Reference Manual

Chapter 2. CPU Features & Specifications
100 PACSystems* RX7i, RX3i and RSTi-EP CPU Reference Manual GFK-2222AD
CPE100/CPE115
Protocols
Modbus RTU Slave
N/A
SNP Slave
N/A
Serial I/O
N/A
SRTP (# simultaneous server conns)
up to 16
Modbus TCP
(# simultaneous server connections)
up to 8
SRTP Channel or Modbus TCP Client
(# simultaneous)
up to 8
Ethernet Global Data (EGD)
Y
Number of EGD Exchanges (max)
63
8
Selective Consumption of EGD
N/A
PROFINET
64
Y
OPC-UA Server
61
N/A
Remote Station Manager over UDP
Y (limited)
Station Manager over Serial Comm Port
N/A
Redundancy Features
N/A
Memory Error Checking and Correction
(ECC)
N/A
Switchover Time (max)
65
N/A
Switchover Time (min)
65
N/A
Max data in redundancy transfer list
66
N/A
Redundant Synchronized Links
Supported
N/A
63
Limit is per target, so all producers and consumers are counted towards this limit.
64
CPE100/CPE115(firmware version 9.30 or later) provide PROFINET support with MRP via an embedded PROFINET Controller:
no external hardware is required.
65
Switchover time is defined as the time from failure detection until backup CPU is active in a redundancy system.
66
Symbolic variable and Reference data can be exchanged between redundancy controllers, up to the stipulated limit.

GE PACSystems RX7i Specifications

General

Brand	GE
Model	PACSystems RX7i
Category	Controller
Language	English