GE SCOUT100-Ex - Section 8 - Send and Receive Information; Transfer Recordings from Instrument to Ascent

Section 8 — Send and Receive Information
152
Section 8 — Send and Receive
Information
This section describes how to transfer information between your
instrument and Ascent. You will learn to:
• Transfer information to and from your instrument.
• Synchronize your instrument's time zone with the computer that
receives the recordings.
• Import and export data using a USB flash drive.
Transfer Recordings from Instrument to
Ascent
You can transfer recordings you have taken on your instrument to
Ascent.
NOTE: Before your instrument can communicate with Ascent, you
will need to add it in Ascent. See the Ascent Reference Guide for
details.
To transfer recordings from your instrument to Ascent:
1. Connect your supplied USB data transfer cable to your computer
and the USB to PC port on your instrument.
2. Switch your instrument on.
3. Open Ascent.
4. Click the Receive button to establish communication between
Ascent and your instrument.
5. Ensure the Comms Method field is set to Instrument.
6. Select your instrument in the dropdown list provided — All folders
located on your instrument will display.
7. Tick the checkboxes beside the data folders you wish to transfer to
Ascent.
8. Click Receive at the bottom of the window to start transferring
recordings.
9. Click OK when the transfer is complete > Click Close.