Section 13 — General Setup Options
246
Daylight Saving Automatic Adjustment
You can set your instrument to automatically adjust to Daylight Saving.
This is important for ensuring data is imported correctly when you are
working with remote instruments in different time zones.
If required, you can also deactivate the automatic adjustment to
Daylight Saving.
To access these options:
1. Press Options.
2. Press Date/Time.
3. Press Daylight Saving repeatedly to toggle between the
available options:
• Auto Adjust
• Do Not Adjust
NOTE: If your country is not listed in the available time zones, you
will need to select a country with the same GMT offset. Once you
have done this, ensure you set the ‘Daylight Saving’ option to 'Do
Not Adjust'.
Setting your instrument to automatically adjust to daylight savings
To Next Page
Loading...
