GE SCOUT100-Ex - Change Sensor; Add Structure to Existing Machine

Section 10 — Create, Edit, and Delete Items
201
Change Sensor
If required you can change the sensor assigned to the parameter set. To
do this:
1. Press Sensor Setup.
2. Press Change Sensor beside your measuring channel > Select a
different sensor.
3. Press Create New Sensor to define a new sensor.
MORE: See Define and Edit Sensor.
4. Press Select as Default to select the sensor you wish to use for
schedule entries sent from Ascent.
5. Press the key on the left beside your chosen channel to enable it (if
required).
6. Press twice to return to the Record Review menu.
Add Structure to Existing Machine
You can add structures to an existing machine structure. To do this:
1. Press or Record Review on the main menu.
2. Press on the main menu to display your machines.
3. Use the arrow keys on the left to select a machine.
4. Press repeatedly to expand the machine so its points and
other lower level items display.
5. Select the machine, point, or location where you wish to add the
new structure.
6. Press to display the machine creation icons.
7. Press the appropriate key beside each icon to create that item.