Section 11 — Balancing Rotors
232
Adjusting weights for a new radius location
Review Previous Balancing Jobs
You can review previous balancing jobs. To do this:
1. Press Balance on the main menu.
2. Press Select Machine.
3. Use the arrow keys on the left to select a machine — All balancing
jobs associated with that machine will display in the Recordings
column on the right.
4. Press to select the Recordings column — A black border will
display around it, indicating you can now browse through the
recordings. The newest balance job is highlighted at the top of the
column.
5. Press to display the selected recording or use the up/down
arrows on the left to select another.
6. Press View and Save on the Balancing menu to access the
Balancing report.
To Next Page
Loading...
Need help?
General
