Section 13 — General Setup Options
255
Free up Instrument Memory
You should remove unnecessary data from your instrument whenever
possible. Ideally you should transfer recordings to Ascent, then delete
these measurements from your instrument memory. The easiest way to
do this is to receive all data from your instrument into Ascent. You can
then immediately resend the folder from Ascent to your instrument.
Measurements within the folder will be deleted from your instrument.
Formatting your instrument's memory will also increase available
memory by deleting all machines, routes, and recordings.
MORE: See Reformat Memory Card.
Emptying your instrument's recycle bin will also achieve this.
MORE: See Empty Recycle Bin.
To manually delete individual folders from your instrument:
1. Press Folders & USB Export from the main menu.
2. Select the required folder.
3. Press Delete Folder.
TIP: Avoid deleting folders that contain measurements which have
NOT been received into Ascent, unless you are certain they are
NOT required.
To Next Page
Loading...
Need help?
General
