Section 8 — Send and Receive Information
165
Connecting to your preferred Wi-Fi network
Connect instrument to wireless network
Once you have set up your preferred wireless connection, your
instrument retains these details, enabling you to connect quickly and
easily whenever required.
To connect your instrument to the wireless connection you have set up,
simply insert your Wi-Fi dongle into the USB port of your instrument —
Your instrument will automatically connect to your preferred network.
To preserve battery power, we recommend you remove your Wi-Fi
adapter from the USB port when you have finished communicating. This
also applies when the instrument is switched off.
NOTE: The IP65 environmental sealing certification for the
instrument is only met when the rubber cover for the connectors is
in place. This is particularly important if you are working in a wet
or dusty environment.
TIP: If the LED light is off and your Wi-Fi dongle is not working, the
over-current protection of the USB port might have tripped. You
will need to remove and re-insert the instrument battery to resolve
this.
To Next Page
Loading...
