Section 9 — Working with Routes
170
Walkthrough — Take Recordings using
Route
Once you have taken the first recording, your instrument will continue to
guide you through the remaining route entries. You can take recordings
sequentially as they appear in the route list, or change the order as you
go by skipping individual route entries or machines. This is particularly
useful if a machine is temporarily unavailable. If this happens, you can
continue taking measurements and return to the machine at a later
time.
If a location contains several route entries that do NOT require a change
of sensor, the recordings can be taken automatically one after the other.
To access this feature, you select the required location. If an individual
route entry is highlighted, the instrument will only collect that route
entry. It will then wait for input from you. If you need to change sensors,
a message will display, telling you which sensor or tachometer to
connect.
To Next Page
Loading...
Need help?
General
