GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
Chapter 3 - System Setup 3-95
The Wireless detection process screen is displayed - Figure 3-97.
At the end of the wireless detection process, a message displays on the screen indicating that the
wireless adaptor is connected - see Figure 3-98.
6.) Return to the instructions for "Installing the Compact Wireless-G Adaptor Software" on page 3-90
and repeat the entire procedure in order to configure the second USB port.
7.) When done, proceed to perform the following functionality tests:
- "Wireless USB Network Test" on page 4-25
Figure 3-97 Wireless Detection Process
Figure 3-98 Confirmation that Wireless Adaptor is Connected
To Next Page
Loading...
