GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-79
9.) Replace all tie-wraps.
10.)Shorten the USB power cable by folding it into a “u” shape and fasten together with tie wraps as
shown in Figure 8-95.
11.)Check that the routing procedure has been implemented correctly: lower the cart’s top-shelf and
make sure that the cables do not interfere with the movement of the cart’s top shelf.
Figure 8-94 Peripheral AC Outlet and Ground Cable Connected
Figure 8-95 USB Power Cable Folded and Fastened with Tie-wraps
To Next Page
Loading...
