GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-133
Section 8-7
Peripherals
NOTE: This section provides references to the installation procedures for the various peripherals used
with the Vivid q N portable ultrasound scanner. Connection to the system is via one of the USB
ports (unless otherwise stated) on the rear panel, as shown in Figure 8-143 below.
8-7-1 Connecting and Removing Peripherals
For detailed instructions on connecting peripherals to the Vivid q N portable ultrasound scanner, refer
to the following procedure, as appropriate.
• "USB Global Modem" on page 3-34
• "Wireless USB Network Adaptor" on page 3-35
• "DVD/CD-RW Drive" on page 3-36
• "MOD Drive" on page 3-43
• "External USB Hard Disk" on page 3-44
For detailed installation and removal instructions, see "External USB Hard Disk Replacement
Procedure" on page 8-135
• "USB Memory Stick" on page 3-45
• "Connecting the VCR" on page 3-48
Figure 8-143 Vivid q N Rear Panel
To Next Page
Loading...
