Gema OptiCenter OC09 - Vibrating Trolley; Powder Hopper

Rev. 00 02/21
OptiCenter OC09 Product description

23
Vibrating trolley**
– Powder feed directly from the original powder manufacturer's
container
– Use up to max. 12 guns
– Can be swiveled for easy powder emptying
– Fluidizing/suction lance
– Fresh powder pump connection
– Recovery powder pump connection
Fig.
13
Powder hopper**
Fig.
14
:
– For larger quantities of one powder type
– Capacity 60 or 100 liters
– Connection point for fluidizing/suction lance
– Connection point for external powder supply
– Connection point for recovered powder
– Fluidized, with venting connector
– Suitable for metallic powders
– Level sensor optionally available
When using the powder hopper, the venting hose must be connected to
the connector , and the ball valve (10) must be open during the
entire operation.