Rev. 00 02/21
OptiCenter OC09 Maintenance / Repairs
79
Repair work
In the event of malfunctions or faults, the product must be checked and
repaired by an authorized Gema service workshop. The repairs must only
be performed by an authorized specialist.
Improper tampering can result in serious danger for user and equipment.
Repairs
For repairs, please contact Gema Technical Support.
Destruction of the operating panel
The operating panel may only be opened by the manufacturer or an
authorized body.
► Operate the operating panel only with the housing completely
closed.
Use appropriate packaging when transporting.
SD card – data backup
The contents of the SD card can be saved on another medium in order to
be able to copy them back in case of card damage or data loss. Further
information can be found in the SD card user manual.
Some operating systems do not display individual files. This is
often the case with “autoexec.bat” files, for example.
– When copying the data, make sure that all data is visible and
copied.
– If in doubt, contact your IT department.
Inserting the SD card: See chapter "Inserting the SD card" on page 56.
To Next Page
Loading...
