Rev. 00 02/21
OptiCenter OC09 Operation
59
Operation
Operation
During the initial commissioning of the device, the functional
check is to be performed without powder!
Starting the OptiCenter
1. Turn the plant main switch to the ON position.
– The control starts the operating system, the PLC control and the
operating software to the main page.
fig.
: Main page (not logged in)
2. Press the symbol in the login status bar to log in with a user
name and password
The user does not have to be logged in to operate the OptiCenter
with its basic functions.
– More about the login procedure see chapter "Login" on page 36.
After logging in, the following functions are available to the user:
– Configuration
– Diagnostics
– Settings
To Next Page
Loading...
