Gema OptiCenter OC09 - Symbols

Rev. 00 02/21
32

Touch panel / operating panel OptiCenter OC09
Symbols
fig.
24
Navigation bar
Mode-dependent bar
Process-dependent bar
Plant overview
Powder filling level indicator
Login status bar
messages
Function keys
ATTENTION
Sensitive touch surface.
Pointed or sharp objects can damage the screen.
► Do not use any pointed or sharp objects (e.g. knife).
► Only activate the touch panel with your finger or a stylus.
► When wearing gloves, ensure that these are clean. They must not
be covered with abrasive dust or sharp particles.
The function keys are distributed on the user interface.
Coating operation
Cleaning operation
mode
Main menu
OptiCenter OFF
(Press and hold 2
seconds)
US sieve ON/OFF
Vibrator ON/OFF
Extraction system
ON/OFF
Gun hose rinsing
Manual coating
Confirm error
messages