V 09/18
OptiStar CG06 Automatic gun control unit Options • 45
Options
FlowControl module
The FlowControl module, in addition to the basic OptiStar equipment,
permits a most precise measurement and regulation of the conveying air
and the supplementary air, up to the injector (injector wear or powder
hose clogging are not taken into account).
The air volumes are continuously measured by sensors and automatical-
ly regulated to the preset values.
The reproducibility of the setting values for conveying air and supplemen-
tary air will be increased and result in more uniform coating results.
- Precise air volume measurement
- Highest regulating dynamics
- Micro controller based air volume calibration
- High air volume regulation range - total air up to 6.5 Nm³/h
(C0 = 1.8 dm³/h, powder output = 80%)
FlowControl module
To Next Page
Loading...
