18
Figure 7: Terminal communication settings
Please confirm this window with OK when you have done all settings. The Terminal is now
ready for communication with the SNMP-adapter and the main menu will start after the
password has been entered. (Default password is “cs121–snmp”).
Note: The number of password-characters is limited in Telnet. Please do never
use a password longer than 15 characters if you intend to use the
configuration via Telnet!
2.1.4.2 Main menu & IP-Settings
Figure 8: Telnet - Main Menu
To select any option in the main menu enter the number of the option at the Enter command
=> prompt. The program displays the desired screen.
Type 1 at the prompt and you enter the menu “IP Settings”. Within this menu you can
enter basic network configurations, e.g. IP-address, Gateway-address etc.
To Next Page
Loading...