Generex CS121BL - Configuration Static ARP Entries; Scheduled Actions; Figure 21: HTTP - Network & Security Hide HTTP Links; Figure 22: HTTP - Network & Security ARP Settings

30
Figure 21: HTTP – Network & Security Hide HTTP Links
3.2.6 Configuration Static ARP Entries
The CS121 firmware version 4.x or higher provides the configuration of static ARP entries into
the “Network & Security” menu:
Figure 22: HTTP – Network & Security ARP Settings
You can determine into the ARP Settings, which IP address to which MAC address will be
assigned. Therefore the ARP entry will not expire for this IP address. The ARP table will be
determined firmly and will never expire! Case of application: HP Teaming or an ARP entry is
desired, but the ARP table cannot be restored automatically.
3.2.7 Scheduled Actions
Figure 23: HTTP – Scheduled Actions
In the “Scheduled Actions” menu you can schedule the following actions:
Self test: A self test is a short hardware test, which switches the device to a short discharging.
Battery test: A battery test is a short battery test, which switches the battery to a short
discharging.