3
Contents
English Manual 2
1. The CS121 family - Introduction 6
1.1 About your CS121 6
1.1.1 General information 6
1.1.2 Functionalities of your CS121 6
1.2 About the communication with the CS121-Adapter 8
1.3 The CS121 Adapter Package 8
1.4 Comparison 10
1.5 CS121 overview 11
1.6 A typical installation - CS121 in a network environment 13
1.7 Connect your CS121 ... 13
1.7.1 ... via serial port 13
1.7.2 ... via LAN 14
1.8 Verifying the CS121 connectivity 14
2. Quickstart 15
2.1 Setting up basic network configuration 15
2.1.1 DHCP – Obtain an IP address automatically 15
2.1.2 Establishment of a static CS121 IP address manually 16
2.1.3 Using HTTP/Webbrowser 16
2.1.4 Using Telnet / MS-HyperTerminal 17
2.1.4.1 Building up a connection 17
2.1.4.2 Main menu & IP-Settings 18
2.1.4.3 UPS Settings 19
2.1.4.4 Save configuration 20
2.2 Adapter-restart and boot procedure 21
2.3 Introduction in the event configuration 21
2.3.1 About same basic events 21
2.3.2 Quickguide to install an RCCMD-job 22
3. Configuration of the CS121 24
3.1 CS121 Status-Monitors 24
3.2 Configuration 25
3.2.1 UPS Model & System 25
3.2.2 Network & Security 27
3.2.3 The CS121 with DHCP utilization 28
3.2.4 The CS121 with ICMP Check 29
3.2.5 Function hide of HTTP links 29
3.2.6 Configuration Static ARP Entries 30
3.2.7 Scheduled Actions 30
3.2.8 Email 32
3.2.9 Timeserver 33
3.2.10 Events / Alarms 35
3.2.10.1 Treshold events 36
3.2.10.2 Logfile entries 37
3.2.10.3 Email-Job 38
3.2.10.4 Email-To-SMS 39
3.2.10.5 RCCMD Jobs 39
3.2.10.5.1 RCCMD Shutdown 41
3.2.10.5.2 Automatic Reset of the Redundancy Alarm 44
3.2.10.5.3 RCCMD Execute/command 45
3.2.10.5.4 Example of use 1: CS121-adapter as RCCMD-listener 46
3.2.10.5.5 Example of use 2: CS121-adapter switches an output 46
3.2.10.5.6 RCCMD Trap 48
3.2.10.6 UPS shutdown 48
3.2.10.7 AUX-Port 49
To Next Page
Loading...
