4
3.2.10.8 Wake on LAN (WOL) 49
3.2.11 Scheduled Actions 50
3.2.12 SNMP 50
3.2.13 COM2 & AUX 51
3.2.13.1 COM2 51
3.2.13.2 AUX and SITESWITCH4 Settings 54
3.2.14 SENSORMANAGER 54
3.2.15 RAS Configuration 55
3.2.16 Save Configuration / Reboot 56
3.3 Reading the Logfiles 56
3.4 CS121 for Transfer Switches 59
4. Adapter Software-Updates (Firmware) 60
4.1 Firmwareupdate via Setup-tool 60
4.2 Firmwareupdate via FTP 60
4.3 Firmware flash renewal and recovery 61
4.4 How to get the “upsman.cfg” from a CS121 to your computer via FTP 62
4.5 Changing the Adapter’s MAC-Address 66
5. Additional Software 68
5.1 RCCMD 68
5.1.1 Installation 68
5.1.2 RCCMD with SSL for Windows 70
5.1.3 RCCMD with own SSL certificates 72
5.1.4 RCCMD client as relay station 73
5.1.5 License regulations 73
5.2 gChart 73
5.3 UPS monitor (UPSMON) 75
6. CS121-Enhancements, Field of applications 77
6.1 SiteSwitch4 (SS4) and SiteSwitch4AUX (SS4AUX) 77
6.1.1 SS4 Feature overview 78
6.1.2 SS4 Contents 78
6.1.3 SS4 Installation 78
6.1.4 SS4 - Technical data 79
6.2 Sensor SM_T_COM 79
6.2.1 SM_T_COM configuration 80
6.3 SENSORMANAGER & SENSORMANAGER II 81
6.3.1 General information 81
6.3.2 Installation and Network integration 82
6.3.3 Special features of theSENSORMANANAGER II 85
6.3.4 Configuration 86
6.3.5 Alarm Matrix of the SENSORMANAGER II 87
6.4 RASMANAGER 88
6.5 GSM Modem – Notification via SMS 89
6.6 LED-Matrix Display 91
6.7 MODBUS / PROFIBUS 92
6.8 UNMS (UPS-Network Management System) 93
7. Troubleshooting – FAQ 95
Appendix 97
A. CS121 - Technical data 97
B. CE- and UL-Certification 97
C. Cable and Circuit board configuration, Pin/AUX-Ports, SensorMan 97
D. MODBUS Interface 101
D.1. General information 101
D.2. Available Modbus Function Codes 102
D.3. Exception Codes 102
To Next Page
Loading...
