13
ReACT Pro
A
S
Remember that the rules you learned in your basic SCUBA certification course still apply to the
diving you will do while using a dive computer - some will become even more important. Tech-
nology is no substitute for common sense, and a dive computer only provides the person using it
with data, not the knowledge to use it.
WARNING: Inspect your ReACT Pro prior to every dive, checking for any
signs of the entrance of moisture, damage to the buttons, or damage to the
LCD display. If these or other signs of damage are found, return the unit to
an Authorized Genesis Scuba Dealer. DO NOT attempt to use it until it has
received factory service.
CONTROL BUTTONS
The ReACT Pro is a unique dive computer with interactive controls that allow you to select vari-
ous display options and access specific information when you choose to see it. These are referred
to as the A (Advance) and S (Select) buttons (Fig. 1).
The buttons can be pressed repeatedly, or held in to scroll and continue as you set or access differ-
ent display modes.
On the surface the buttons are used to activate the ReACT Pro; activate the backlight; access the
Date/Time, Fly, Plan, and Log modes; set variables such as FO2, Date/Time, etc.
During dives, the buttons are used to activate the backlight and view Alternate displays of infor-
mation.
Fig. 1 - Control Buttons
To Next Page
Loading...
Need help?
General
