17
ReACT Pro
FT
A
S
NITROXNITROX
PM
A
S
NITROXNITROX
DEPTH DISPLAYS
The Depth display indicates Depths from 0 to 399 FT (120 M) in 1 FT (.5 M) increments.
During a dive, Current Depth is displayed continuously on the Main display with the icon FT (or
M) below it (Fig. 5a).
When the LEFT button is pressed 1 time to view the first Alternate display, Maximum Depth and
the icons MAX and FT (or M) are displayed in place of Current Depth.
In the event that you descend deeper than 330 FT (99.5 M), 399 FT (120 M) when set for Gauge
Mode, the Depth display will show three dashes (- - -) to indicate that you have gone 'out of
range'. This is described in more detail in the Special Situations section of this manual.
During a Decompression Dive, required Ceiling Stop Depths of 50 FT (15 M) and 60 FT (18 M)
are displayed in the lower/right portion of the LCD. This is described in more detail in the Special
Situations section of this manual.
DATE DISPLAY
The Date (Month_Day) is displayed when the ReACT Pro is in Surface Mode (Fig. 6a/b). It is
not displayed in any other modes on the surface or during dives.
Fig. 5 - Depth (97 FT)
Fig. 6 - Date (August 27)
a
a
b
To Next Page
Loading...
Need help?
General
