63
ReACT Pro
ANNUAL INSPECTIONS AND SERVICE
Your ReACT Pro should be inspected annually by an Authorized Genesis Scuba Dealer who will perform a factory prescribed
function check and inspection for damage or wear. To keep the 2 year limited warranty in effect, this inspection must be com-
pleted one year after purchase (± 30 days). The original sales receipt and owner's portion of the Warranty Registration Card
must be presented at the time of service. It is recommended that you have this inspection performed even after the warranty pe-
riod has expired to ensure your ReACT Pro is working properly.
A service record is provided in the back of this manual for your convenience. It should be signed by the Authorized Genesis
Dealer service technician after each annual inspection or factory service. The costs of annual inspections are not covered under
the terms of the 2 year limited warranty.
WARNING: If you are in doubt about the accuracy of your ReACT Pro's depth readings, DO NOT
attempt to dive with it until it has been inspected by an Authorized Genesis Scuba Dealer.
The facility conducting the depth check must have a pressure test chamber that is capable of pressurizing the ReACT Pro to its
maximum operating depth of 399 FT (120 M). Also, the test gauge on the pressure test chamber must be as accurate as the
Depth Sensor in the ReACT Pro (± 1% of full scale).
CAUTION: Never pressure test the ReACT Pro in an air environment. Doing so may damage the
Depth Sensor; possibly resulting in erroneous depth or time readings.
It is possible to damage the ReACT Pro Depth Sensor if it is not pressure tested properly. The ReACT Pro must be placed
completely underwater when being pressure tested to protect the Depth Sensor.
To Next Page
Loading...
Need help?
General
