79
ReACT Pro
A
S
CLEAR (RESET)
The ReACT Pro is configured with a feature that allows calculations pertaining to a dive series in progress to be interrupted.
Activation of this feature will delete all data accumulated during the dive series necessary for planning a next dive and should
only be performed if the user plans to suspend diving for at least 24 hours.
This feature is provided for institutional users of the computer as a means to provide a clean computer to subsequent users
without having to wait for the computer to complete all calculations in real time. This practice requires strict control to ensure
that the clean computer is not used by a diver that has been diving within the preceding 24 hours. Failure to follow this prac-
tice could adversely affect the accuracy of subsequent calculations by failing to account for previous exposure to elevated ni-
trogen and oxygen partial pressures.
WARNINGS:
Do not attempt to activate the CLEAR (Reset) function on your computer. Proper
activation of this feature requires controlled procedures and is restricted to
authorized personnel.
Improper activation of this feature could expose the user to elevated risk of
decompression sickness or oxygen toxicity. This is a serious risk and could result
in injury or death.
If the CLEAR (Reset) screen appears (Fig. 82), cease all operation of the unit's
buttons and wait until the Surface Main screen appears on the display (2 minutes).
If the unit shuts Off completely, all calculations for repetitive dives will have been
cleared in which case you 'must wait at least 24 hours' before resuming diving
activity.
Fig. 82 - Clear (reset)
To Next Page
Loading...
Need help?
General
