Genesis React Pro - After the First 2 Hours

48
PO2
PO2
SAT
SAT
2
O
A
S
NITROXNITROX
NITROX
SAT
SAT
A
S
To view the second Data screen for that dive, press/release the S (right) button while viewing the
Data 1 screen. Information displayed includes (Fig. 47) -
• LOG icon
• Surface Interval (hr:min) prior to that dive with Wave icon
• AIR (or NITROX) icon
• FO2 (xx %), set for that dive, blank if AIR
• O2 (xx %), accumulated at the time you surfaced with O2 SAT icons, blank if AIR
• PO2 (x.xx ATA), max level reached during that dive with PO2 icon, blank if AIR
> press the A (left) button 1 time to view the Preview screen of the previous dive's Log
To exit Log Mode at any time and return to the Surface Main:
• press both buttons simultaneously for 2 seconds
• Operation will revert to the Surface Main after 2 minutes, if no button is pressed.
AFTER THE FIRST 2 HOURS
Two hours after the last dive, the Surface Main will no longer be displayed. The Fly/Desat screen
will be displayed continuously, giving the final countdowns from 22:00 and 9:59 (hr:min) to 0:00
(Fig. 48).
To activate Surface Mode and access other modes, press/release either button 1 time.
• The Surface Main screen will be displayed.
• Operation will revert to Fly/Desat after 2 hours, if neither button is pressed.
Fig. 47 - Log Data 2
Fig. 48 - Log Screen #2