27
ReACT Pro
MAX
FT
A
S
BT
A
S
SET DEPTH ALARM
Factory set for 330 FT, the Alarm can be set to values between 30 FT (3 M) and 330 FT ( 99 M).
• While viewing the Set 1 screen, press/release the A (left) button 6 times (< 2 sec each time),
the Set Depth Alarm screen appears with the Set Point flashing (Fig. 19).
• Press/release the S (right) button repeatedly (< 2 sec each time) to increase the Set Point
from 30 FT (9 M) up to 330 FT (99 M) in increments of 10 FT (3 M); or depress/hold the S
button to scroll upward through the Set Points at a rate of 8 per second.
• Press/release the A button (< 2 sec) to accept the setting and access Set Bottom Time
(Elapsed Dive Time) Alarm.
• Depress both buttons for 2 seconds to revert to the Surface Main.
SET BOTTOM TIME (BT) ALARM
Factory set for 3:00 (hr:min), the Alarm can be set to values between 0:10 and 3:00 (hr:min).
• While viewing the Set 1 screen, press/release the A (left) button 7 times (< 2 sec each time),
the Set BT Alarm screen appears with the Set Point flashing (Fig. 20).
• Press/release the S (right) button repeatedly (< 2 sec each time) to increase the Set Point
from 0:10 (hr:min) up to 3:00 (hr:min) in increments of 0:10 (hr:min); or depress/hold the S
button to scroll upward through the Set Points at a rate of 8 per second.
• Press/release the A button (< 2 sec) to accept the setting and access Set Reserve Time (Dive
Time Remaining) Alarm.
• Depress both buttons for 2 seconds to revert to the Surface Main.
Fig. 20 - Set BT Alarm
Fig. 19 - Set Depth Alarm
To Next Page
Loading...
Need help?
General
