64
PM
A
S
AIRAIR
BATTERY LIFE
Battery consumption rate varies throughout periods of operation, which begin upon activation and
continue for 24 hours after surfacing from a dive. The exact number of dives, or hours of opera-
tion, that you will obtain is subject to variables, such as, temperature, the number of dives con-
ducted during each operational period, and the frequency and duration that the backlight is used
(excessive use will reduce battery life).
Tests and calculations indicate that a new CR2450 Lithium battery will maintain unit operation for
approximately 300 hours or -
• 150 dives, if (1) 1 hour dive per activation period to over -
• 300 dive hours, if (2 or more) 1 hour dives per activation period
LOW BATTERY CONDITION
During operation, voltage level is checked every second while on the surface. You will be alerted
to a Low Battery condition by a flashing Battery icon (Fig. 64).
Upon decreasing to a voltage level that will not maintain proper unit operation, the icon will flash
for 5 seconds followed by shutdown of the ReACT Pro.
If the ReACT Pro did not display the Low Battery icon prior to entering the Dive mode, and a
Low Battery condition occurs during a dive, there will be sufficient battery power to maintain unit
operation for the remainder of that dive, however the Backlight will be disabled. You will be
alerted by the Battery icon.
Fig. 64 - Low Battery
To Next Page
Loading...
Need help?
General
