Genesis React Pro - Set Date Format; Set Date

29
ReACT Pro
SET DATE FORMAT
Factory set for Month_Day, the Date Format feature can be set to Day_Month.
• While viewing the Set 2 screen, press/release the A (left) button 2 times (< 2 sec each time),
the Set Date Format screen appears with the Set Point flashing (Fig. 23).
• Press/release the S (right) button (< 2 sec) to toggle the Set Point between Month_Day and
Day_Month. The graphic dAY indicates location of Day on the Date screen.
• Press/release the A button (< 2 sec) to accept the setting and access Set Date.
• Depress both buttons for 2 seconds to revert to the Surface Main.
SET DATE
Factory set for the local Date, the Date can be set to values between 01/01/2008 and 12/31/2051.
• While viewing the Set 2 screen, press/release the A (left) button 3 times (< 2 sec each time),
the Set Date screen appears with the Year Set Point flashing (Fig. 24).
• Press/release the S (right) button repeatedly (< 2 sec each time) to increase the Year Set
Point up to 2051 in increments of 1 Year; or depress/hold the S button to scroll upward
through the Set Points at a rate of 8 per second.
• Press/release the A button (< 2 sec) to accept the Year, the Month Set Point will flash.
• Press/release the S (right) button repeatedly (< 2 sec each time) to increase the Month Set
Point from 1 up to 12 in increments of 1 Month; or depress/hold the S button to scroll up-
ward through the Set Points at a rate of 8 per second.
• Press/release the A button (< 2 sec) to accept the Month, the Day Set Point will flash.
Fig. 24 - Set Date
Fig. 23 - Set Date Format