19
ReACT Pro
SAT
2
O
A
S
NITROXNITROX
AM
A
S
NITROXNITROX
TEMPERATURE DISPLAY
While in the Surface Mode, Ambient Temperature (Fig. 9A_a) and Altitude level (Fig. 9A_b) will
be displayed when an Alternate display is accessed. During a dive, Water Temperature (Fig.
9B_a) is displayed when an Alternate display is accessed.
If the Temperature exceeds a value of '99', two dashes ( - - ) will be displayed on the screen until
the unit's temperature decreases to '99'.
BACKLIGHT FEATURE
On the surface, while in Surface Mode or Fly Mode, the ReACT's Hydroglow™ Backlight will il-
luminate the display when the S button is pressed and released. If the button is kept depressed,
the Backlight will not come on.
During dives, the Backlight will illuminate the display when the S button is pressed. The display
will remain illuminated as long as the Button is pressed, plus 10 seconds after being released.
OPERATING TEMPERATURE
The ReACT Pro will operate in water temperatures from 28° to 95° F (-2 to 35 °C) and out of the
water from 20° to 140°F (-6 to 60 °C). At extremely low temperatures, the LCD may become
sluggish, but this will not affect it's accuracy. If stored or transported in extremely low tempera-
ture areas (below freezing), warm the module and battery with body heat before diving.
Fig. 9B - Temperature (dive)
a
b
Fig. 9A - Temperature &
Altitude (surface)
a
To Next Page
Loading...
Need help?
General
