45
ReACT Pro
SAT
A
S
PM
A
S
NITROXNITROX
AFTER THE TRANSITION PERIOD (THE FIRST 2 HOURS)
Once 10 minutes on the surface have elapsed, the Wave icon stops flashing indicating that the
dive and Transition Period are completed, and a subsequent descent will be considered a new
dive. That dive will then be entered into the Dive Log and download memory.
For the remainder of the first 2 hours after surfacing, the Surface Main will be displayed (Fig. 41)
and you will have full access to the other modes.
Plan Mode will now show either adjusted No Deco Limits based upon your previous dive profiles,
if calculated to be nitrogen controlled, or adjusted O2 limits based upon accumulation of oxygen,
if calculated to be oxygen controlled. Calculated dive times and the maximum allowed depth dis-
played will increase as the real time Surface Interval increases after completion of a dive.
To access Fly/Desat -
• press/release the A (left) button 3 times, while viewing the Surface Main
Surf Main >> ALT >> Plan >> Fly/Dsat
• operation reverts to the Surface Main after 2 minutes, unless the button is pressed again to
access the Log
The Time to Fly counter (Fig. 42a) begins counting down 10 minutes after the last dive (after the
Transition Period) displaying FLY with a countdown that starts at 23:50 (hr:min) and counts
down to 0:00.
Fig. 41 - Surface Main
(post dive)
Fig. 42 - Fly/Dsat
a
To Next Page
Loading...
Need help?
General
