51
ReACT Pro
TAT
FT
STOP
A
S
O
D
E
C
NITROXNITROX
TAT
FT
STOP
D
E
C
O
O
C
D
E
O
D
E
C
A
S
O
D
E
C
NITROXNITROX
Entry into Deco
Upon entering Deco, the Ceiling Bar and Up Arrow icons appear below the Wave icon as a warn-
ing, and the NiBG will display a segment next to the deepest Stop Depth required. Other informa-
tion displayed on the Main includes (Fig. 50):
• Total Ascent Time (hr:min) with TAT icon = times required at all Deco Stops plus vertical
ascent time calculated at 30 FPM (9 MPM)
• AIR (or NITROX) operating mode icon with Wave/Profile icons
• Current Depth with FT (or M) icon
• Stop Time Required at that Depth (:min) with STOP icon
• ARI, while ascending
> The Up Arrow and STOP icons flash until ascent to within 10 FT (3 M) below a Stop
Depth then they are solid.
> If a Stop Depth of 50 FT (15 M) or 60 FT (18 M) is required, all segments of the NiBG will
be displayed and the required Stop Depth will appear numerically in the lower/right portion
of the screen (Fig. 51a).
> To access ALT displays, press/release the A (left) button.
> To activate the Backlight, press/release the S (right) button.
Fig. 50 - Deco Entry/Main
Fig. 51 - Stop > 40 FT (12 M)
a
b
To Next Page
Loading...
Need help?
General
