GeoVision GV-IPCamera Series User Manual

94
6. Thread the Ethernet cable into the conduit connector.
A. Remove the plug from the conduit connector.
B. Disintegrate the removed conduit connector. Thread the
Ethernet cable through the 3 parts.
C. Assemble the conduit connector.
Note: If you can’t plug the self-prepared RJ-45 connector into the jack of
the conduit, it is suggested to use the supplied RJ-45 connector.

GeoVision GV-IPCamera Series Specifications

General

Brand	GeoVision
Model	GV-IPCamera Series
Category	Security Camera
Language	English