GeoVision GV-IPCamera Series User Manual

230
22.4 Connecting the Camera
13 4 2
2
1. Use a standard network cable to connect the camera to your network.
2. Optionally connect a speaker and an external microphone.
3. Connect power using one of the following methods:
 plugging the power adapter to the power port.
 using the Power over Ethernet (PoE) function to provide power
over the network cable.
4. Optionally connect to an input / output device. For details, see I/O
Terminal Block, PTZ Camera Chapter, GV-IPCAM Firmware Manual
on the Software DVD.
5. The status LED of the camera will be on.
6. Access the camera See 24. Accessing the Camera in the Quick Start
Guide.
7. Adjust for image clarity using GV-IP Device Utility. For details, see
24.3 Adjusting Image Clarity in the Quick Start Guide.

GeoVision GV-IPCamera Series Specifications

General

Brand	GeoVision
Model	GV-IPCamera Series
Category	Security Camera
Language	English