Fixed IP Dome
193
18
18.3 Installation
The Fixed IP Camera is designed for indoors. With the standard packing,
there are three ways to install the Fixed IP Camera: hard-ceiling mount,
in-ceiling mount and wall-surface mount.
18.3.1 Hard-Ceiling Mount
1. Paste the supplied sticker onto a desired location on the ceiling. Drill
the three red dots and the ellipse mark only if you wish to run the wires
into the ceiling.
2. Unpack the camera package and take out the camera body.
Use the torx
wrench to loosen
the housing cover
at the front and the
back
To Next Page
Loading...
Need help?
General
