GeoVision GV-IPCamera Series User Manual

Fixed IP Dome
197
18
18.3.2 In-Ceiling Mount
1. Follow step 2 in the Hard-Ceiling Mount section to remove the housing
cover and take out the camera body.
2. Paste the supplied sticker onto a desired location on the ceiling and
cut a circle on the ceiling along the edge of the sticker.
3. On the mounting plate, locate the 3 holes labeled as 1 and insert the 3
copper pillars from the back side.
4. From the side with the numbering, secure the copper pillars with 3
copper pillar screws.

GeoVision GV-IPCamera Series Specifications

General

Brand	GeoVision
Model	GV-IPCamera Series
Category	Security Camera
Language	English