GeoVision GV-IPCamera Series User Manual

240
23.4 Connecting the Camera
1. Use the supplied RJ12 cable to connect the camera lens and the main
body. The direction of cable can be changed by using the RJ12
connector.
2. Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided over the network cable.
Status LED
The status LED of the camera will be on.

GeoVision GV-IPCamera Series Specifications

General

Brand	GeoVision
Model	GV-IPCamera Series
Category	Security Camera
Language	English