GeoVision GV-IPCamera Series User Manual

214
20.4 Connecting the Camera
1
2
1. Use a standard network cable to connect the camera to your network.
2. Power on using the power adapter.
3. The status LED of the camera will be orange. Then you can set the IP
address for the unit. See 24.2 Accessing the Camera in the Quick
Start Guide.
IMPORTANT: Be sure to use the GeoVision power adapter to power up
the camera. To use your own power cable, make sure you look up the
power source value indicated at the camera’s back panel.

GeoVision GV-IPCamera Series Specifications

General

Brand	GeoVision
Model	GV-IPCamera Series
Category	Security Camera
Language	English