GeoVision GV-IPCamera Series User Manual

220
21.4 Connecting the Camera
1
2
1. Use a standard network cable to connect the camera to your network.
2. Connect power using one of the following methods:
 Plug the power adapter to the power port.
 Use the Power over Ethernet (PoE) function and the power will be
provided over the network cable.
3. When the ready LED of the camera shines green, the camera is ready
for use.
Note: PoE function is only supported for GV-CA120 and GV-CA220.

GeoVision GV-IPCamera Series Specifications

General

Brand	GeoVision
Model	GV-IPCamera Series
Category	Security Camera
Language	English