GeoVision GV-IPCamera Series User Manual

68
8.3.1 Adjusting the Angles
The Bullet Camera is designed to be adjustable in three shafts.
Tip: The three shafts are designed to offer easy and flexible ceiling / wall
mount installation.
First Shaft
You can adjust the camera body by 360 degrees to the right or the left.
1. Unscrew the panning lock screw with the torx wrench.
Torx Wrench
Panning Lock Screw
2. Adjust the angle of camera body to the right or the left, and fasten the
panning lock screw.
0 ~ 360°

GeoVision GV-IPCamera Series Specifications

General

Brand	GeoVision
Model	GV-IPCamera Series
Category	Security Camera
Language	English