GeoVision GV-IPCamera Series User Manual

270
Target Fixed IP Dome
Press and hold the default button for about 8 seconds. Release the default
button when the
status LED blinks. For details, see Box Camera, 27.2
Directly on the Camera
.
Cube Camera
Press and hold the default button for about 8 seconds. Release the default
button when the
status LED blinks. The status LED turns orange when the
camera is ready to use. For details, see Box Camera,
27.2 Directly on the
Camera
.
Status LED
Default button

GeoVision GV-IPCamera Series Specifications

General

Brand	GeoVision
Model	GV-IPCamera Series
Category	Security Camera
Language	English