GeoVision GV-IPCamera Series User Manual

Ultra Bullet Camera
111
11
11.4.3 Power Connection
Connect the camera to power using one of the following methods:
 Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided at the same time.
 Plug the power adaptor to the terminal block as shown below.
1. Insert the black wire of the data cable to the left pin (-) and the red
wire to the right pin (+).
2. Connect the DC 5V power adapter to the terminal block.
DC 5V Power Adaptor
Terminal Block

GeoVision GV-IPCamera Series Specifications

General

Brand	GeoVision
Model	GV-IPCamera Series
Category	Security Camera
Language	English