224
No. Name Description
1
DC 12V / AC 24V
Terminal Block
Connects to a DV 12V or AC 24V Power
Adapter.
2 LAN / PoE Connects to a 10/100 Ethernet or PoE.
3 I/O Terminal Block
Connects to I/O terminal device. For
details, see I/O Terminal Block, PTZ
Camera Chapter, GV-IPCAM Firmware
Manual on the Software DVD.
4 Memory Card Slot
Receives a micro SD card (SD/SDHC,
version 2.0 only, Class 10) to store
recording data.
5 Audio Out Connects a speaker for audio output.
6 Audio In Connects a microphone for audio input.
7 Status LED
Turns green when the system operates
normally and turns off when system error
occurs.
8 Power LED
Turns green when the power is on and
turns off when the power is off.
9 Focus Ring
Manually rotates this ring left or right to
adjust focus.
10 IR
Turns on to automatically illuminate a
surveillance area by infrared light to
produce clearer images during the night.
11 Microphone Records the sounds.
12 Default
Resets the camera to default settings. See
27. Restoring to Default Settings in the
Quick Start Guide.
To Next Page
Loading...
Need help?
General
