252
6. For Target Mini Fixed Dome and Target Mini Fixed Rugged Dome,
hold the camera cover close to the lens and use the supplied focus
adjustment tool for precise focus adjustment.
7. For Mini Fixed Dome and Mini Fixed Rugged Dome, hold the
camera cover close to the lens for precise focus adjustment.
8. Adjust the Zoom Screw and the Focus Screw of the camera slowly
until the focus value reaches the maximum.
Note:
1. For locations of adjustment screws and rings in each model, see
Locations of Adjustment Screws, section, Getting Started Chapter,
GV-IPCAM Firmware Manual on the Software DVD.
2. Do not over tighten the screws. The screws only need to be as tight
as your fingers can get them to be. Do not bother using any tool to
get them tighter. Doing so can damage the structure of lens.
3. The maximum focus value may vary when the environment
changes.
To Next Page
Loading...
Need help?
General
