Upgrading System Firmware
259
26
1. Stop these operations: monitoring of IPCam H.264, connection to
GV-System and remote connections to Center V2, Vital Sign Monitor,
ViewLog Server and 3GPP/RTSP.
2. In the Live View window, click the Show System Menu button and
select Remote Config. This dialog box appears.
3. Click the Browse button to locate the firmware file (.img) saved at your
local computer.
4. Click the Upgrade button to start the upgrade.
WARNING: The interruption of power supply during updating causes not
only update failures but also damages to the camera. In this case,
please contact your sales representative and send your device back to
GeoVision for repair.
To Next Page
Loading...
Need help?
General
