Gerber EDGE FX - Choosing a Language

56
CHAPTER 6
Configuring the GERBER EDGE FX via the Web Interface
Choosing a language
The language displayed on the GERBER EDGE FX (and on all web pages except Diagnostics)
can be changed via the System Setting page of the web interface. The default language is
English.
Note: Currently English is the only language available.
To change the display language
1 Open the GERBER EDGE FX web interface by entering the printer's IP address in the
Location or Address line of your web browser (for example: http://169.254.128.129).
The Welcome to GERBER EDGE FX screen displays.
2 Click the System Settings link to open the System Settings page.
3 Choose a language from the drop down menu.
4 Click Change Settings to apply the new language to the GERBER EDGE FX and to the
web interface pages.